[어보브반도체(주)]

Starter Kit_A31L123RLN supports users to develop applications required for A31L12x (A31L123, A31L122) series MCUs.
This Starter Kit is based on A31L12x MCU, and includes LED, Push Button, built-in A-Link interface for debugging and USB connector.

Features

• ARM Cortex®-M0+ 32MHz
• Ext. Crystal 16MHz in Starter Kit
• 64KB Flash
• 8KB SRAM
• Power Down Mode for Ultra Low Power
• 16-bit Timer/ 32-bit Timer
• 12-bit 1Msps ADC
• LPUART (9600bps @32.768kHz）
• Comparator with internal Vref
• SWD Debug Interface
• Input (Reset, User SW) Button X 2
• 64-LQFP, 10x10mm

Getting Started

• Check jumper position on the Starter Kit
• Connect the Starter Kit to PC via USB cable
• Check connection from Keil MDK-ARM, IAR EWARM to CMSIS-DAP
(ABOV A-Link/A-Link Pro PC GUI only supports download)
• Write code and compile
• Download using Keil ULINK2, A-Link/A-Link Pro Debugger
• Press Reset Switch
• Check program operation (KEIL, IAR, Eclipse IDE supports debug)
• The demo software and example codes to use the features are available on ABOV website