StarterKit-A96L322AEN

Starter Kit_A96L322AEN supports users to develop applications required for A96L322 series MCUs.
This Starter Kit is based on A96L322 MCU, and includes LED, Push Button, built-in E-OCD II interface for debugging and USB connector.

Features

• 8-bit CISC Core (M8051EW, 2clock/cycle)
• 4KB Flash
• 256B SRAM
• 128B EEPROM
• 16-bit H/W CRC/Checksum
• 16-bit Timer X 2
• 8-bit X 1
• 8-bit WDT 1 X 1
• USART (UART + SPI) X 1
• OP-Amp X 2
• 10-bit ADC
• Siren
• Constant Sink Current Generator X 2 (Max 274mA)
• Internal 1Mhz RC oscillator
• On chip debug and ISP
• 16-SOPN

Getting Started

• Install the driver of OCD or OCD II on PC
• Check jumper position on Starter Kit
• Connect the Starter Kit to PC via USB cable
• Check whether the PC recognizes the USB device normally from the Device Manager
(Device should be recognized as OCD or OCD II or as HID device)
• Create source code projects and compile
• Download execution code to Starter Kit by using dedicated downloader or debugger
• Press reset button from Starter Kit or click run button of debugger
• The OCD or OCD II driver; demo software and example codes of Starter Kit can be downloaded from ABOV website

System Requirements

• Windows PC (XP, Vista, 7, 8, 10)
• Micro USB Cable

Development Tools

- KEIL C51 Development Tools
- IAR EW8051

Support Tools

- OCD

* For further information on the devices, please contact: sales_gl@abov.co.kr

-->