StarterKit-A96L533AEN

Starter Kit_A96L533AEN enables users to develop applications using A96L533 series. It integrates an A96L533 MCU, LEDs, push buttons, an E-OCD II interface for debugging, and a USB connector.

Features

• 8-bit CISC Core (M8051EW, 2clock/cycle)
• 16KB Flash
• 1KB SRAM
• 256B EEPROM
• 16-bit H/W CRC/Checksum
• 16-bit Timer X 3
• 8-bit X 1
• 8-bit WDT X 1
• USART (UART + SPI) X 1
• OP-Amp X 2
• 10-bit ADC
• Constant Sink Current Generator X 2 (Max 274mA)
• Internal 4Mhz RC oscillator
• LDO 3.0V ±3.0% (@Vin 24V)
• Internal 32KHz RC oscillator
• LVR (1.6V,2.2V,2.4V,2.7V)
• On chip debug and ISP
• 16-SOPN

Getting Started

• Install the driver of OCD or OCD II on PC
• Check jumper position on Starter Kit
• Connect the Starter Kit to PC via USB cable
• Check whether the PC recognizes the USB device normally from the Device Manager (Device should be recognized as OCD or OCD II or as HID device)
• Create source code projects and compile
• Download execution code to Starter Kit by using dedicated downloader or debugger
• Press reset button from Starter Kit or click run button of debugger
** The OCD or OCD II driver; demo software and example codes of Starter Kit can be downloaded from ABOV website

System Requirements

• Windows OS (XP, Vista, 7, 8, 10)
• Micro USB Cable

Development Tools

- KEIL C51 Development Tools

Support Tools

- E-OCD II

* For further information on the devices, please contact: sales_gl@abov.co.kr

-->