-
Products
-
Home Appliance Solution
-
Main & Display Solution
- G1 (Cortex-M0+, Basic)
- G2 (Cortex-M0+, up to 48MHz)
- G3 (Cortex-M0+, 48MHz, USB option)
- G5 (Cortex-M3, up to 75MHz)
- M (Cortex-M0+/M3/M4F, High-Performance)
- L1 (Cortex-M0+, Low-Power)
- L2 (Cortex-M0+, Low-Power)
- 8-bit Gx
- L1 (M8051, Low-Power)
- S1 (Cortex-M0+, up to 32MHz)
- L7 (Cortex-M4F, Low-Power)
- C1 (Cortex-M0+, Value)
- G4 (Cortex-M4F, High-Performance)
- Motor Solution
- Touch Solution
- On-Device AI
-
Main & Display Solution
- Motor Solution
- Sensor Solution
- Power Solution
- Fire & Safety Solution
- Remote Controller Solution
-
32-bit MCUs
-
32-bit MCUs
- G1 (Cortex M0+, Basic)
- G2 (Cortex M0+, up to 48MHz)
- G3 (Cortex M0+, 48MHz, USB option)
- G5 (Cortex M3, up to 75MHz)
- M (Cortex-M0+/M3/M4F, High-Performance)
- L1 (Cortex-M0+, Low-Power)
- L2 (Cortex-M0+, Low-Power)
- S1 (Cortex-M0+, up to 32MHz)
- L7 (Cortex-M4F, Low-Power)
- Touch (Cortex-CM0+)
- C1 (Cortex-M0+, Value)
- G4 (Cortex-M4F, High-Performance)
-
32-bit MCUs
- 8-bit MCUs
- Legacy MCUs
- Logic Sensor IC
By Application
By CPU
-
Home Appliance Solution
- Applications
- Tools & Support
- About
StarterKit-A31C122KYN
The StarterKit-A31C122KYN supports the development of applications required when using the A31C122 series.
Features
• CM0+ 32 MHz
• Flash: 32 KB
• RAM: 6 KB
• 16-bit Timer x 7
• 32-bit Timer x 1
• WDT
• DMA 4-ch
• 12-bit ADC x 1 unit, 150 ksps, 13-ch
• HSI 32 MHz
• CRC support
• SWD debug interface
• Voltage range: 1.8 V to 5.5 V
• Temp. range: -40°C to +85°C
• 32-QFN 5x5
• Flash: 32 KB
• RAM: 6 KB
• 16-bit Timer x 7
• 32-bit Timer x 1
• WDT
• DMA 4-ch
• 12-bit ADC x 1 unit, 150 ksps, 13-ch
• HSI 32 MHz
• CRC support
• SWD debug interface
• Voltage range: 1.8 V to 5.5 V
• Temp. range: -40°C to +85°C
• 32-QFN 5x5
Getting Started
• Check jumper settings on the Starter Kit.
• Connect the Starter Kit to the host computer through USB port.
• Download the sample code from the website*.
• Build the target project to make the executable HEX file.
• Flash the output HEX file to the Starter Kit.
• Press the reset button to check the operation**.
• The demo software and example codes are available on the ABOV website
You can download and run it using the corresponding debugger tool.
• Connect the Starter Kit to the host computer through USB port.
• Download the sample code from the website*.
• Build the target project to make the executable HEX file.
• Flash the output HEX file to the Starter Kit.
• Press the reset button to check the operation**.
• The demo software and example codes are available on the ABOV website
You can download and run it using the corresponding debugger tool.
System Requirements
• Windows PC
• USB Type-C cable
• USB Type-C cable
Support Tools
A-Link2
* For further information on the devices, please contact: sales_gl@abov.co.kr
TOP
Authentication
Network Services
ABOV Semiconductor Co. Ltd. COPYRIGHT 2021 ABOV Semiconductor Co., Ltd. ALL RIGHTS RESERVED.