[어보브반도체(주)]

Starter Kit_A31G112CL supports users to develop applications required for A31G11x (A31G112, A31G111) series MCUs.
This Starter Kit is based on A31G11x MCU, and includes LED, Push Button, built-in A-Link interface for debugging and USB connector.

Features

• ARM Cortex®-M0+ 40MHz
• Ext. Crystal 16MHz in Starter Kit
• 32KB Flash
• 4KB SRAM
• 16-bit Timer/ 32-bit Timer
• 16-bit 3-phase PWM
• Watch Dog Timer / Watch Timer
• 12-bit 50ksps ADC
• USART x 2, UART x 2, I2C x 2
• SWD Debug Interface
• Input (Reset, User SW) Button X 2
• 48-LQFP, 7x7mm

Getting Started

• Check jumper position on the Starter Kit
• Connect the Starter Kit to PC via USB cable
• Check connection from Keil MDK-ARM, IAR EWARM to CMSIS-DAP
(ABOV A-Link/A-Link Pro PC GUI only supports download)
• Write code and compile
• Download using Keil ULINK2, A-Link/A-Link Pro Debugger
• Press Reset Switch
• Check program operation (KEIL, IAR, Eclipse IDE supports debug)
• The demo software and example codes to use the features are available on ABOV website