-
Products
-
Home Appliance Solution
-
Main & Display Solution
- G1 (Cortex-M0+, Basic)
- G2 (Cortex-M0+, up to 48MHz)
- G3 (Cortex-M0+, 48MHz, USB option)
- G5 (Cortex-M3, up to 75MHz)
- M (Cortex-M0+/M3/M4F, High-Performance)
- L1 (Cortex-M0+, Low-Power)
- L2 (Cortex-M0+, Low-Power)
- 8-bit Gx
- L1 (M8051, Low-Power)
- S1 (Cortex-M0+, up to 32MHz)
- L7 (Cortex-M4F, Low-Power)
- C1 (Cortex-M0+, Value)
- G4 (Cortex-M4F, High-Performance)
- Motor Solution
- Touch Solution
- On-Device AI
-
Main & Display Solution
- Motor Solution
- Sensor Solution
- Power Solution
- Fire & Safety Solution
- Remote Controller Solution
-
32-bit MCUs
-
32-bit MCUs
- G1 (Cortex M0+, Basic)
- G2 (Cortex M0+, up to 48MHz)
- G3 (Cortex M0+, 48MHz, USB option)
- G5 (Cortex M3, up to 75MHz)
- M (Cortex-M0+/M3/M4F, High-Performance)
- L1 (Cortex-M0+, Low-Power)
- L2 (Cortex-M0+, Low-Power)
- S1 (Cortex-M0+, up to 32MHz)
- L7 (Cortex-M4F, Low-Power)
- Touch (Cortex-CM0+)
- C1 (Cortex-M0+, Value)
- G4 (Cortex-M4F, High-Performance)
-
32-bit MCUs
- 8-bit MCUs
- Legacy MCUs
- Logic Sensor IC
By Application
By CPU
-
Home Appliance Solution
- Applications
- Tools & Support
- About
StarterKit-A31L214MLN
StarterKit-A31L214MLN supports users to develop applications required for A31L21x (A31L214, A31L213) series MCUs.
This Starter Kit is based on A31L21x MCU, and includes LED, Push Button, built-in A-Link interface for debugging and USB connector.
Features
• ARM Cortex®-M0+ 32MHz
• 128KB Flash
• 20KB SRAM
• 4KB Data Flash
• Deep Sleep Modes for Ultra Low Power
• 12-bit 1Msps ADC
• LPUART (9,600bps @32.768kHz）
• Comparator x 2
• LCD Driver for up to 8x39 Segments
• AES-128, Random Number Generator
• SWD Debug Interface
• 80-LQFP, 12x12
• 128KB Flash
• 20KB SRAM
• 4KB Data Flash
• Deep Sleep Modes for Ultra Low Power
• 12-bit 1Msps ADC
• LPUART (9,600bps @32.768kHz）
• Comparator x 2
• LCD Driver for up to 8x39 Segments
• AES-128, Random Number Generator
• SWD Debug Interface
• 80-LQFP, 12x12
Getting Started
• Check jumper position on the Starter Kit
• Connect the Starter Kit to PC via USB cable
• Check connection from Keil MDK-ARM, IAR EWARM to CMSIS-DAP (ABOV A-Link/A-Link Pro PC GUI only supports download)
• Write code and compile
• Download using Keil ULINK2, A-Link/A-Link Pro Debugger
• Press Reset Switch
• Check program operation (KEIL, IAR, Eclipse IDE supports debug)
• The demo software and example codes to use the features are available on ABOV website
• Connect the Starter Kit to PC via USB cable
• Check connection from Keil MDK-ARM, IAR EWARM to CMSIS-DAP (ABOV A-Link/A-Link Pro PC GUI only supports download)
• Write code and compile
• Download using Keil ULINK2, A-Link/A-Link Pro Debugger
• Press Reset Switch
• Check program operation (KEIL, IAR, Eclipse IDE supports debug)
• The demo software and example codes to use the features are available on ABOV website
System Requirements
• Windows 7/8/10/11
• USB Mini B cable
• USB Mini B cable
Support Tools
A-Link
A-Link Pro
A-Link Pro
* For further information on the devices, please contact: sales_gl@abov.co.kr
TOP
Authentication
Network Services
ABOV Semiconductor Co. Ltd. COPYRIGHT 2021 ABOV Semiconductor Co., Ltd. ALL RIGHTS RESERVED.