[어보브반도체(주)]

StarterKit_A33G539VLN supports users to develop applications required for A33G53x (A33G539, A33G538) series MCUs.
This Starter Kit is based on A33G53x MCU, and includes LED, Push Button, built-in A-Link interface for debugging and USB connector.

Features

• ARM Cortex®-M3 75MHz
• Ext. Crystal 8MHz in Starter Kit
• 768KB Flash (Dual Bank : 384KB + 384KB)
• 32KB Data Flash
• 24KB SRAM
• 16-bit Timer x 10
• PWM x 8
• Watchdog, Free-run Timer
• 70ksps 12-bit ADC
• UART x 4, I2C x 2, SPI x 2
• JTAG/SWD Debug Interface
• Input (Reset, User SW) Button X 2
• ECC (Error Correction Code)
• RWW (Read While Write)
• 100-LQFP 14x14mm

Getting Started

• Check jumper position on the Starter Kit
• Connect the Starter Kit to PC via USB cable
• Check connection from Keil MDK-ARM, IAR EWARM to CMSIS-DAP (ABOV A-Link/A-Link Pro PC GUI only supports download)
• Open or create a source code project and compile it without error
• Download the execution code to Starter Kit using debugger or flash downloader program
• Restart the Starter kit by executing in debugger or pressing reset button on the Starter Kit
** Related materials, demo software and example codes of the Starter Kit are available on ABOV website