[어보브반도체(주)]

• Cortex®-M4F 200 MHz
• 2 MB Dual Bank Flash w/ECC
• 32 KB Data Flash w/ECC
• 256 KB SRAM
• 16-bit Timer x10
• 32-bit Watchdog, 32-bit FRT
• 16-ch DMA
• UART x13, SPI x12, I2Cx4
• CANFD x2, QSPI
• 3-Phase MPWM x2
• 1.5 Msps 12-bit ADC x3
• 12-bit DAC x2, COMP x4
• RNG , AES-128, CRC, ITM
• 2.7 V to 5.5 V
• 120-LQFP 16 x 16mm

Getting Started

• Check jumper settings on the Starter Kit.
• Connect the Starter Kit to the host computer through USB port.
• Download the sample code from the website*.
• Build the target project to make the executable HEX file.
• Flash the output HEX file to the Starter Kit.
• Press the reset button to check the operation**.
• The demo software and example codes are available on the ABOV website

You can download and run it using the corresponding debugger tool.