[어보브반도체(주)]

StarterKit_A34L716VLN(100-Pin) supports users to develop applications required for A34L716(56-QFN, 64/100-LQFP) series MCUs.
This Starter Kit is based on A34L716 MCU, and includes LED, Push Button, built-in A-Link interface for debugging and USB connector.

Features

•ARM Cortex®-M4F 32MHz
•Ext. Crystal 8MHz in Starter Kit
•256KB Flash
•32KB Data Flash
•24KB SRAM
•16-bit Timer x 8
•Watchdog, Free-run Timer, Real Time Clock
•1.0Msps 12-bit ADC x 2
•12-bit DAC x 2
•OPAMP x 2
•7/8/16/32-bit CRC Generators
•UART x 1, LP UART x 2, USART x 2, I2C x 2, SPI x 2, USB FS x 1
•SWD Debug Interface
•Input (Reset, User SW) Button X 2
•LED x 6
•USB C-Type connector x 1
•100-pin LQFP 14x14mm

Getting Started

• Check jumper position on the Starter Kit
• Connect the Starter Kit to PC via USB cable
• Check connection from Keil MDK-ARM, IAR EWARM to CMSIS-DAP (ABOV A-Link/A-Link Pro PC GUI only supports download)
• Open or create a source code project and compile it without error
• Download the execution code to Starter Kit using debugger or flash downloader program
• Restart the Starter kit by executing in debugger or pressing reset button on the Starter Kit
** Related materials, demo software and example codes of the Starter Kit are available on ABOV website