[어보브반도체(주)]

StarterKit_A33G539VLN supports users to develop applications required for A33G53x (A33G539, A33G538) series MCUs.
This Starter Kit is based on A33G53x MCU, and incl
udes LED, Push Button, built-in A-Link interface for debugging and USB connector.

Features

• Cortex®-M4F 120 MHz
• 512 Code Flash Memory
• 64 KB SRAM
• 16-bit Timer x10
• Watchdog, FRT x2
• 1.5 Msps 12-bit ADC x3
• 7-/8-/16-/32-bit CRC Generators
• UART x6, I2C x2, SPI x2
• 3-Phase MPWM x2
• 16-ch DMA
• 2.7 V to 5.5 V
• -40°C to +85°C
• 100-LQFP 14 x 14mm

Getting Started

• Check jumper settings on the Starter Kit.
• Connect the Starter Kit to the host computer through USB port.
• Download the sample code from the website*.
• Build the target project to make the executable HEX file.
• Flash the output HEX file to the Starter Kit.
• Press the reset button to check the operation**.
• The demo software and example codes are available on the ABOV website

You can download and run it using the corresponding debugger tool.