[어보브반도체(주)]

The StarterKit-A34M466CLN supports users in developing application software for the A34M466 MCU. Based on the A34M466 MCU, it features on-board LEDs and push buttons, alongside an integrated A-Link interface for debugging and a USB connector.

Features

• Cortex®-M4F 120 MHz
• 256 KB Code Flash with ECC
• 16 KB SRAM
• Watchdog, FRT
• 16-bit Timer x 6
• 3-phase MPWM x 1
• 2.0 Msps 12-bit ADC x1
• Up to 42 GPIOs
• UART x 2, I2C x 1, SPI x 1
• 7-/8-/16-/32-bit CRC
• 2.7 V to 5.5 V
• 48-LQFP 7 x 7 mm

Getting Started

• Check jumper settings on the Starter Kit.
• Connect the Starter Kit to the host computer through USB port.
• Download the sample code from the website*.
• Build the target project to make the executable HEX file.
• Flash the output HEX file to the Starter Kit.
• Press the reset button to check the operation**.
• The demo software and example codes are available on the ABOV website

You can download and run it using the corresponding debugger tool.