[어보브반도체(주)]

Starter Kit_AC33M4064LBN supports users to develop applications required for AC33M3064 / AC33M4064 MCUs.
This Starter Kit is based on AC33Mx064 MCU, and includes LED, Push Button, built-in A-Link interface for debugging and USB connector.

Features

• ARM Cortex®-M3 48MHz
• Ext. Crystal 8MHz in Starter Kit
• 64KB Flash
• 8KB SRAM
• 16-bit Timer x 6
• Programmable Watchdog Timer (WDT)
• 1.5Msps 12-bit ADC
• MPWM generator x 1
• UART x 2, I2C x 1, SPI x 1
• SWD Debug Interface
• Single Power Supply 3.0 to 5.0V
• Temperature Range -40 to 85˚C
• 32/48-pin LQFP Packages

Getting Started

• Check jumper position on the Starter Kit
• Connect the Starter Kit to PC via USB cable
• Check connection from Keil MDK-ARM, IAR EWARM to CMSIS-DAP
(ABOV A-Link/A-Link Pro PC GUI only supports download)
• Open or create a source code project and compile it without error
• Download the execution code to Starter Kit using debugger or flash downloader program
• Restart the Starter kit by executing in debugger or pressing reset button on the Starter Kit
• Related materials, demo software and example codes of the Starter Kit are available on ABOV website