A33M116/A33M114 are 32-bit high-performance microcontrollers with up to 256KB of flash memory. It is a powerful microcontroller which provides effective solutions to various home appliances which require both low power consumption and high performance. The MCU is equipped with two three-phase PWM generators capable of controlling two inverter motors. The MCU’s three high-speed 12-bit analog-to-digital converters (ADCs) are capable of processing motor driving information coming in through analog channels. It also supports external communication through a variety of interfaces such as UART, SPI and I2C, has four analog comparators and four programmable gain AMPs.

A96L414/A96L416 is an advanced 8-bit CMOS MCU with 8/16Kbytes of Flash. Offering the convenience of Flash multi-programming features, this device can provide fire alarm and single type smoke detectors systems with a simple, robust, and cost effective solution as a complete set of semiconductor product to implement the smart alarm systems.

A96T418 is based on M8051 core, and provides standard features of 8051 such as 8-bit ALU, PC, 8-bit registers, timers and counters, serial data communication, PSW, DPTR, SP, 8-bit data bus and 2x16-bit address bus, and 8/11/16-bit operations. In addition, A96T418 incorporates following features to offer highly flexible and cost effective solutions: 32Kbytes of FLASH, 256bytes of IRAM, and 1792bytes of XRAM, Basic interval timer, watchdog timer, and 16-bit timer/counter, 16-bit PPG output, I2C, and 12-bit ADC, 20-Channel Self Capacitive Touch Sensing,8COM x 16SEG LED Driver, On-chip POR, LVR, On-chip oscillator and clock circuitry. As a field proven best seller,A96T418 introduces rich features such as excellent noise immunity, code optimization, cost effectiveness, and so on.

The ultra-low power A31L12x series is a microcontroller based on ARM Cortex-M0+ core with a flash memory of up to 64 Kbytes with an SRAM of 8KB. The operation voltage range of the device is from 1.65V to 3.6V. A31L12x series provide a highly flexible and cost effective solution for many battery operated applications.
The ultra-low power A31L12x series has a 16-bit timers, real timer and a calendar as well as 12-bit ADC, comparator, CRC generator, UART, USART, I2C, SPI. The series is also equipped with smart card interface, LCD driver/controller, DMA, along with POR, LVR, LVI, and an internal RC oscillator.
To reduce system power consumption, A31L12x devices also provide various power modes and ultra-low-power peripherals such as LPUART and LP timer. The A31L12x series is suitable for ultra-low power applications that require long battery life.

A96L523 is an MCP (Multi Chip Package) product that combines a high voltage line interface logic IC and an 8-bit MCU. As an MCU, A96L523 is an advanced CMOS 8-bit microcontroller with 4 Kbytes of FLASH memory. It is powerful microcontroller featuring low power consumption and cost effective solution for smoke detector applications. A96L523 has the features such as 4k bytes of FLASH memory, 256 bytes of IRAM, 128 bytes of Data EEPROM, general purpose I/O, basic interval timer, watchdog timer, 16-bit timer/counter, 16-bit PPG output, Siren, Line Interface, 10-bit A/D converter, programmable gain amplifier, constant sink current generator, Flash CRC/Checksum generator, on-chip POR, LVR, USART, on-chip oscillator and clock circuitry.

AL1113/AL1115 are line interface ICs for a fire system controller such as smoke detector or a fire detector. These products include LDO and UVLO functions and Tx/Rx interface functions. AL1113/AL1115 run with high voltage input and 3V of voltage output (LDO). LDO supplies stable power to a target MCU and enables the connection of multiple units in a fire safety system. There are Tx and Rx pins for 1-line communication.

A96G14x series – A96G140 / A96G148 – are advanced CMOS 8-bit microcontrollers with maximum of 64 Kbytes of Flash. These powerful microcontrollers provide a highly flexible and cost effective solution to many embedded control applications. The products offer the following features : 32/64 Kbytes of Flash, 256 Bytes of iRAM, 2.25 Kbytes of xRAM, general purpose I/O, basic interval timer, WDT, 8/16-bit timer/counter, 16-bit PPG output, 8-bit PWM output, 16-bit PWM output, watch timer, buzzer driving port, USI, 12-bit ADC, on-chip POR, LVR, LVI, on-chip oscillator and clock circuitry. A96G14x series also support power saving modes to reduce power consumption.

A96L322 is an advanced CMOS 8-bit microcontroller with 4 Kbytes of Flash. This powerful microcontroller provides low power consumption and cost effective solution to smoke detector applications. The product provides the following features : 4 Kbytes of Flash, 256 Bytes of iRAM, 128 Bytes of data EEPROM, general purpose I/O, basic interval timer, WDT, 16-bit timer/counter, 16-bit PPG output, line interface, 10-bit ADC, programmable gain amplifier, constant sink current generator, Flash CRC/checksum generator, on-chip POR, LVR, USART, on-chip oscillator and clock circuitry. A96L322 also supports power down modes to reduce power consumption.

A96G174 is an advanced CMOS 8-bit microcontroller with 8 Kbytes of Flash. This powerful microcontroller provides a highly flexible and cost effective solution to many embedded control applications. The product offers the following features : 8 Kbytes of Flash, 256 Bytes of iRAM, 256 Bytes of xRAM, general purpose I/O, basic interval timer, WDT, 8/16-bit timer/counter, 16-bit PPG output, 8-bit PWM output, USART, I2C, 12-bit ADC, on-chip POR, LVR, LVI, on-chip oscillator and clock circuitry. A96G174 also supports power saving modes to reduce power consumption.

This product is a 32-bit microcontroller unit (MCU) suitable for applications that require high-performance processing such as electric motors. The MCU includes the ARM Cortex-M4F, which is a high-performance 32-bit core, and a variety of peripheral devices for motor control. The A34M41x series is equipped with two three-phase PWM generators capable of controlling two inverter motors simultaneously. And an Individual mode optimized for induction heating (IH) has been added. The MCU’s three high-speed 12-bit analog-to-digital converters (ADCs) are capable of processing motor driving information coming in through 24 analog channels. With this function, the MCU can control either two inverter motors, or one inverter motor and a power factor correction (PFC) process, simultaneously. The MCU can have communication with external devices via various interfaces, including UART, SPI, I2C